Introducing the all-new 24 Bay Crevalle!
Designed by fisherman to be the most family friendly bay boat on the market. Unlike Crevalle, many bay boat manufacturers have focused on the fisherman, neglecting to adequately provide necessary family comfort features.
From our 2 removable 72 quart coolers and in-console porta pottie, to the forward seating package and the removable ski pylon, Crevalle has not forgotten the family!
Nor have we forgotten the serious fisherman: 2 release wells, 1 bait well, lockable rod storage for 10 rods, dedicated anchor storage, and in deck cast net storage are just a few of the items every fisherman will get.
From the launch….. to the ride out….. to the first cast or first jump in the water – no other boat meets eye to eye with the all-new 24Bay from Crevalle Boats.
Standard on our Hull and Deck:
No wood construction
Coal tar epoxy coated fuel tanks
Single Piece Fiberglass Stringer System with foam flotation
10 Year Transferable Hull Warranty
Black rub rail with Stainless Steel Insert
Dedicated Anchor Locker
Position Control Hinges on all Hatches
Fiberglass Hatches Finished on both sides
NMMA Certified using ABYC Standards
Self Bailing cockpit
Forged Stainless Steel thru hulls with duckbill valves
Integrated swim platform with 3-step fold-out stainless swim ladder
Standard 6” Engine Jack Plate (24SE not included) combined with notched transom allows our boats to leap on plane in shallow water with no propeller cavitation. The notch provides so much water to the engine pickup that the engine can be run all the way up on the jack plate without fear of overheating the engine.
Marelon Seacocks (Composite material, no corrosion or electrolysis)
Anti-Venturi thru-hull fittings (Allows pumps to operate at speed)
Hidden deck drains with stainless covers and duckbill valves
Welded one piece stern eyes
Deep cockpit for a safe dry ride
Yacht Grip, non-skid deck
Setback transom provides full aft deck
Integrated swim platform with fold out ladder
Vertical rod holders on side of helm (Non-Hard top boats)
Under gunwale rod storage for (2) 8′ rods each side
Forward rod lockers with room for (5) 7′-6″ rods on each side
40″ wide flip up aft seat
Bow Dry storage
(2) removable 72 quart coolers
(6) Custom Crevalle pull-up cleats
(8) stainless cup holders 6 are LED illuminated
Port and Starboard in-gunwale safety gear storage
Digital Instruments (Yamaha , Mercury Vessel View 4, E-Tech iCommand)
Floor storage for 5 Gallon Bucket
Custom aluminum Leaning post with backrest, rigging tray, (4) rod holders, and (2) stainless cup holders, and storage bin
Unobstructed aft fishing deck
Pre wired 8 AWG wiring for trolling motor
Trolling motor plug panel with trim switch
Custom flat bar grab rails molded into the deck
Attwood 1100gph automatic/manual bilge pump
Fuel Water separator
Wet Sounds Speakers
Release Wells (Two) :
Insulated 28 Gallon aft release wells
Venturi aeration bubbler
Protected overflow stand pipe
Commercial Aquarium type aeration
Blue gel coat
Attwood 800 gph, dual port aeration pumps
Check valves on intake plumbing to prevent water level from dropping while at speed.
Bait Well (One) :
Adjustable aeration jet can be closed to convert baitwell into fully insulated cooler
Wide opening allows easy access for cast nets
Side mounted overflow fitting with removable filter dome means no stand pipe to get in the way of netting bait.
Blue gel coat
Sealed lid with double gasket prevents slosh at high speeds and during turns
Standard on our Upholstery:
Custom upholstery with contoured seating and cushions
Contrasting color accents, top stitching, heat reflective vinyls and multi density foam provide maximum endurance and comfort
Our Crevalle exclusive forward cushion package features easily removable molded backrests with integrated armrests. No unsightly stainless pipes or hardware are used.
All vinyls feature Syntec NBT (Nano-Block Technology) antimicrobial formulas to prevent “pinking” and limit mildew growth found in most lower quality vinyls.